No Bias Binding Hexagon Coaster

Remember my hexagon coasters? I fail to mention that it doesn't require any bias binding though it looks like the edges are. I stumbled upon a Youtube video on how to make a hexagon coaster.

I used the method to make my version. Here's how I did it. ( Yay ! It's my first tutorial!) I'ld rather use lots of pics to do the explanation for me :~D

Firstly, cut one 8" hexagon( this will be the back piece/edge trimming) , three 6" hexagons (I used old t-shirt for a padded feel) and 1.5" strips of scraps.

Next, stack the three pieces of 6" hexagons together. Place a square piece of embroidery or any fabric of choice at the center.

Then, place the strips like so and stitch .

Open it out and stitch close to the outer edge.
Repeat all sides.

Place the small hexagon on the big one.Fold the big hexagon side edge in half.

Fold again and pin.
Continue on the next edge. Pin the corners down.Repeat all sides.

Stitch all round close to the edge.

Here it is! The front and back. No more fidgeting with bias binding *-*

A big placemat to hide some burnt marks on the table!

Have a nice time making your hexagon coasters!

p.s. If you find some pics too small to see the details, click on the image to enlarge.

Update:

Friday, July 9, 2010